Applications & Solutions

Discover how Flovv helps across different casting and dispensing applications.

Polyurethane Resin Casting Machine

Flovv is an automated polyurethane resin casting machine. It meters Part A and Part B at a precise, repeatable ratio and blends them in a static mixing nozzle, so you get consistent two-part polyurethane parts with far fewer bubbles than hand mixing — without the cost of an industrial casting line.

Silicone Casting & Mold Making with Flovv

Two-part silicone is the backbone of mold making, and the result lives or dies on the mix ratio. Flovv meters Part A and Part B and blends them in a static nozzle for consistent, bubble-reduced silicone — far less guesswork than weighing and stirring by hand. Silicone-compatible workflows are expanding alongside our material lineup, so contact us about your specific silicone system before you commit a run.

Foam Casting — Two-Part PU Foam Parts with Flovv

Two-part polyurethane foam expands as it cures, which makes the mix ratio and timing unforgiving — get either wrong and you get voids, uneven density, or short fills. Flovv meters Part A and Part B at a fixed ratio and mixes them in-line, so each foam pour starts from the same, repeatable blend. It pairs naturally with the foam capability behind Flovv-e for two-part PU foam work.

Low-Volume Manufacturing Equipment | Flovv

Low-volume manufacturing lives in the gap between one-off prototypes and mass production — tens to a few hundred parts where injection-mold tooling is too expensive but hand-casting is too inconsistent. Flovv automates the measure-mix-pour steps so a small batch of two-part polyurethane or resin parts comes out repeatable, with less waste and rework than manual casting.

Small-Batch Production & Casting with Flovv

Small-batch production is all about repeatability: every part in the run should match, regardless of who pours it. Manual casting fights you here — each hand-mixed cup is a little different. Flovv fixes the A:B ratio and mixes in-line, so a batch of two-part polyurethane or resin parts comes out consistent, with less waste and less rework.

Resin Casting: Casting Resins & How to Choose

"Resin casting" covers a whole family of two-part casting resins — water-clear, rigid, and flexible — each with its own working time, hardness, and finish. This page helps you understand the casting-resin family and pick the right one; Flovv then meters and mixes whichever you choose at a precise, repeatable ratio.

Prototyping with Cast Parts | Flovv

In prototyping, speed, repeatability and low cost are critical. Flovv is a compact casting system that accelerates the path from idea to functional part.

Two-Part Resin Dispensing Machine

Flovv is a two-part resin dispensing machine. It meters Part A and Part B at a precise, repeatable ratio and blends them in a static mixing nozzle as it dispenses — so every shot of two-component polyurethane or resin comes out consistently mixed, with far fewer bubbles than hand stirring.

Low-Pressure RIM Casting Machine

Flovv is a low-pressure, RIM-style two-part liquid casting machine. It meters Part A and Part B at a precise ratio, mixes them in a static nozzle, and dispenses the reacting liquid into your mold — a reaction-injection-style workflow for low-volume and prototype parts, without a high-pressure industrial machine.